Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12V
(130 reviews)
Price: $1,390.01
In Stock
Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12V
Item # 34280055
Our Price: $1,390.01
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (130)
- Q & A (0)
- Photos
Go Power RV Inverters - 34280055
- 2000 Watts
- Pure Sine Wave Inverter
- 12V
- Inverter/Charger/Transfer Switch Functions
- Go Power
- Power Center
- Industrial Duty - Large Loads
2,000-Watt inverter charger combines a pure sine wave inverter, converter charger, and automatic transfer switch. Saves space and simplifies installation by consolidating 3 vital components into 1 compact unit. Includes fixed-mount remote.
Features:
- 3-in-1 Unit combines a pure sine wave inverter, converter charger, and automatic transfer switch
- Consolidated system saves space and means you only have to install 1 component
- 2,000-Watt inverter changes your battery's DC output into AC power and sends it to the RV's electrical system
- Pure sine wave technology replicates household AC power, allowing you to run devices safely
- Converter charger changes AC shore power to DC power to quickly charge your batteries
- Multistage charging helps extend battery life
- Transfer switch automatically changes from inverter to shore power when you hook up at the campground
- Included fixed-mount remote lets you monitor and control the inverter charger from inside your RV
- LED indicators show inverter status and fault conditions
- Multiple connection points let you secure cables and external devices to the inverter
- Includes AC input and output terminals, DC input terminals, remote port, and battery sensor port
- Built-in safety features protect your RV's electrical system
- Fuse block installation kit (sold separately) lets you safely connect the inverter charger to your RV battery
Specs:
- Application: 12V battery systems
- Inverter rated power:
- Running (rated) power output: 2,000 watts
- Starting (surge) power output: 4,000 watts
- Voltage:
- Inverter input: 9 - 17 VDC
- Inverter output: 115 VAC
- Charger input: 80 - 140 VAC
- Charger output: 5 - 16 VDC
- Amperage:
- Inverter peak output: 35 amps
- Inverter continuous output: 17 amps
- Charger current input: 15 amps
- Charger current output: 100 amps
- Transfer switch power: 100 amps (2 legs at 50 amps each)
- Operating temperature range: -4 F to 140 F
- Remote cable length: 50'
- Battery sensor cable length: 25'
- Dimensions:
- Inverter charger: 15" long x 11-1/8" wide x 8" tall
- Remote:
- Front: 5-7/8" wide x 3-7/8" tall
- Rear: 4-11/16" wide x 2-11/16" tall x 1-1/4" deep
- Weight: 38.7 lbs
- 3-Year warranty
Combining an inverter, converter charger, and transfer switch, the Go Power IC Series 2,000-watt inverter charger puts three essential RV functions into one unit. The compact size takes up less space in your RV and simplifies installation. It lets you convert AC shore power into DC power to charge your batteries, inverts your DC battery output into AC power to power electronics and appliances, and automatically transfers to shore power when available.
Pure Sine Wave Inverter Produces Clean AC Power
The pure sine wave inverter changes DC output from your RV batteries into AC power and sends it to the electrical system. It creates clean power with low distortion, making it safe, efficient, and perfect for sensitive electronics like computers. Plus, the inverter can generate 4,000 starting watts and 2,000 running watts which is a great fit for larger appliances or multiple devices.
Smart Converter Charger with Automatic Multistage Charging System
The smart converter charger converts AC shore power into DC power to charge your battery bank. If your RV already has a stock converter charger, it will need to be removed to ensure this part of the unit operates properly.
Using a multistage charging system, the converter charger automatically switches voltages while the battery bank charges. This accelerates the charge, but also helps extend battery life by adjusting the voltage during the different modes. It is compatible with sealed/gel, AGM, flooded/wet cell, and lithium batteries. And with the included fixed-mount remote, you can select charging profiles for the different battery types.
Charging Modes
- Bulk: This mode charges at the full rated load for a quicker recharge time. As the name suggests, this is where the bulk of the charging happens. It typically charges the battery to at least 80% capacity.
- Absorption: This mode provides controlled voltage to ensure a full charge. Once the battery reaches between 80% to 90% capacity, the absorption state will kick in and start charging at a regulated voltage. This mode is set to last for 2 hours after the bulk charge is completed.
- Float: Once the battery reaches full charge, this mode maintains a lower voltage to compensate for self-discharge. This reduces battery stress and minimizes gassing and water loss.
- Equalization: On flooded batteries, this mode (which is only accessible with the included fixed-mount remote) activates to prevent stratification and sulfate buildup during extended float cycles. These two issues can damage a battery by causing the accumulation of acid at the bottom of the battery and hardened sulfate crystals on the battery plates. This mode is especially helpful when your battery is going unused during storage.
Automatically Switches to Shore Power
The integrated transfer switch selects the primary source of AC current. The switch inside of this inverter charger has been pre-wired to automatically change from inverter to shore power to conserve battery life. This switch includes (2) 50-amp legs, which allows you to use up to 100 amps by passing through 12,000 watts on a shore power service. The legs are rated at 120V each, but they can be used as a 240V split-phase or 240V dual input if needed. This would be useful if your RV has larger appliances, such as a clothes dryer or oven range. However, if you plan on using an on-board generator and shore power, you still need an external transfer switch to link power to the inverter charger. If you are just utilizing shore power, you only need this unit since you are switching between two sources.
To prevent electrical interruptions, the time delay circuit board allows the alternate power source to stabilize before a transfer occurs. Additionally, since the switch only accepts one active source, it protects your electrical system from dangerous backfeed that can damage your equipment.
Fixed-Mount Remote
The included fixed-mount remote lets you monitor and control the inverter charger from inside your RV. It includes a digital display that shows the voltage, output power, status, temperature, and charging activity. You can also customize settings like your battery profile, charge rate, and more. And it has a power button that lets you turn the inverter charger on and off.
Connections and Status Lights
The inverter charger includes AC input and output terminals that connect to your AC panel and shore power input. It has DC input terminals which connect to your batteries. Additionally, it has ports for the fixed-mount remote and battery sensor. It also has 2 LEDs that show fault conditions and operation mode. Lastly, it has a power switch that controls the inverter charger.
Safety Features
The system includes a number of safety features. It offers protection from over/under voltage and overloading. The inverter also uses a heat sink process to protect from extreme temperatures, and an internal cooling fan removes excess heat from the unit.
For additional safety, installing a fuse between the battery bank and the inverter charger will protect your equipment from power surges. The Go Power 300-amp fuse block (sold separately) works with this unit and uses a slow blow time-delay feature to withstand surge current. This means it can handle short surges over 300 amps without blowing the fuse, which is great for devices with motors that require more energy to start.
Battery Temperature Sensor Adds Additional Battery Protection
The battery temperature sensor protects the battery bank from large temperature fluctuations. As the inverter charger experiences changes in temperature, the sensor compensates for those changes by adjusting the voltage during charging to help extend the life of your batteries. This protects from overcharging in hot temperatures and undercharging in cold temperatures. The voltage adjustments also ensure that you are getting the most from your charge.
How It Installs
The inverter charger mounts inside your RV in a dry location with ventilation. It should be installed in close proximity to the battery bank, but not in the same compartment. The DC terminals are wired to the battery bank. There are several ways to connect the inverter section to your RV's electrical system, but this will depend on your rig and how you want to use your inverter. Also, the temperature sensor installs to the negative battery terminal and plugs in the battery temperature port on the inverter charger.
80055 Go Power! Industrial Pure Sine Wave Power Inverter Charger - RV Ready - 2000 Watts - 12 Volt
Replaces Go Power GP-IC-2000-12-PKG
Installation Details
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12V - 34280055
Average Customer Rating: 4.7 out of 5 stars (130 Customer Reviews)
2,000-Watt inverter charger combines a pure sine wave inverter, converter charger, and automatic transfer switch. Saves space and simplifies installation by consolidating 3 vital components into 1 compact unit. Includes fixed-mount remote.by: Stephen08/22/2023
I have this installed and the included remote does not work as described in the instructions. When not connected to shore power the remote shows the charger function on yet the instructions say this is not an option.
Also, I changed the power saver mode to 15 minutes from the default off. I didn’t see a change in the remote output after several hours.
Less than 10 days after I ordered this etrailer dropped the price $XXX.XX. That’s not insignificant and they wouldn’t do anything for me about it.
by: Anthony12/17/2023
I replaced my magnum that went out due to a wiring issue. It was easy to replace for the most part although the wire to the controll panel was 6 wire and the old one was 4. It works very well. All I lost was the self start of the old one. Very good product.
by: Edgars05/12/2023
Installed last year in a horse trailer with living quarters. Using with a pair of Dakota lithium batteries. Works great. Powers Microwave with ease. love the ability to pull from battery while also using generator; i can run both microwave and coffee maker together like this.
Points of note:
1) When inverter is turned on there is a quiet weird chirp occasionally. If you're a light sleeper sensitive to sounds, be prepared for a "what is that?" if it is installed in the LQ area.
2) If batteries are full and i plug in my Furman generator (Costco purchased from Costco), the generator gets tripped in to overload when float charging is enabled. Not an issue when charging batteries.
by: Mark07/19/2019
The product itself so far so good. Customer service was good. BUT I thought the # 34277742 switch for my inverter was included with the inverter, I even e mailed the ad to separate sales guys showing them that their ad says the switch is included, bottom line I was out more money for a switch, extremely disappointing, seems like false advertising but what can you do.
Mike L.
7/22/2019
As mentioned in the product description above, the remote switch is sold separately.
by: Edith04/07/2023
We installed this unit in another rv. worked great. Quick Shipping
by: Frank 12/14/2022
Works perfectly!
by: Tim 10/12/2022
IC 2000 - Nice!
by: Jim 11/10/2023
by: Justin 08/15/2022
by: Beau 03/24/2023
by: Sid 08/25/2022
by: Dan07/18/2021
One year + later, this inverter is great! I have it connected to two battleborn lithium batteries. We can run our TV although we don’t much, our Microware, or our coffee Kirin machine - of course not all at once. The fan is a bit noisy but it only fires up when drawing heavy from the inverter. Love it and recommend it.
by: Mike03/07/2024
Good advice to help decide which inverter is right for us. Really fast shipping and delivery.
by: Joe 04/03/2024
I am always amazed at how well the team and eTrailer service customers. The communication from product purchase to delivery is exceptional. Price/value of products is highly appreciated as well. I always save time and money when going to eTrailer to find parts for my Lance 2445 Trailer.
by: Charles07/12/2023
Works great, the unit is powering a work shed in the backyard. The Inverter is paired up with 400w of solar and two battleborn 100a batteries. The unit replaced a 3000w inverter from another company that fried twice within a year.
by: Johnathan 08/23/2022
This product is reliable and works well to the stated 400 watts when the load is steady. I like that this unit works well with my 29.4V DC battery pack (7S). Past 250 watts, even small surges will trip the unit off. At around 250 watts(steady) my quart compressor cooler will kill AC power out when it kicks on. It appears that the 600 watt surge rating is inaccurate.
by: Justin10/11/2023
Inverter failed around the one year mark with light use. 1 star for that but 3 stars overall because of GoPowers customer service who provided a replacement without trouble.
by: Tom 09/02/2023
Product works designed. It was professionally installed along with instant hot water and 4 vmax tanks.
by: C Jeff09/14/2023
Perfect to charge phones, computers, and other electronic items with off grid. And use my CPAP.
by: William 02/06/2024
etrailer always does great!
by: Claudeen01/06/2024
Great price and very fast shipping. Best place for all your trailer needs
by: Steve & Cindy05/27/2022
We are currently working on hooking up the inverter we ordered from etrailer for the maiden voyage in our new trailer. It appeared these items would not be arriving before we left, but after a quick phone call to etrailer and a conversation with Steve Z. in customer service our inverter was on it's way by 10:00 am that morning. It did indeed arrive in 2 days giving us time to hook this up. We were thrilled as we wanted to put this trailer to work off the grid. Great service. Thank you so much.
by: Stanley 09/11/2023
Everything went well. I’m very pleased with the service & Inverter.
by: Scott H03/03/2021
The inverter works very well. The only reason I gave it 3 stars is because the front of the unit is made with cheap plastic. The screws that hold the electric outlet in the front of the unit is embedded into the plastic. The plastic broke the first time I plugged into the outlet. I was leaving in two days to go on a trip to Utah so did not send it back. I voided the warranty by opening the unit, reinforced the outlet by sandwiching the plastic front in between two pieces of aluminum and used screws to hold the outlet in place. Since doing this, everything has worked flawlessly.
I would not buy this item again due to the plastic front.
by: Steve10/18/2021
I finally received my Go Power IC3000 after a nearly three-week delay. Unfortunately, I missed my window of opportunity to get it installed this year, so I am not able to complete a review of the product at this time. I can say, installation is going to be quite a challenge. The item is large and heavy. Finding a suitable location that meets all the requirements is going to be difficult. The batteries are located at the front of the trailer, while the AC lines are on the other side of the basement. Since the inverter cannot be located in the same area as the batteries, I'm not sure I am going to be able to reach everything and maintain the 10' maximum length requirement of the 0000 DC cable. We will see what happens next spring. I will post a follow-up review post-installation if possible.
25
130
Show More Reviews
See what our Experts say about this Go Power RV Inverters
- Recommended 2000W Charger/Inverter to Replace A PD1610A 1000W InverterI recommend replacing your Progressive Dynamics 1000 Watt Inverter # PD94FR with the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055. This will allow you to select the correct charging profile for sealed/gel, AGM, flooded/wet cell, and lithium batteries. This will protect the Lithium Batteries # GP99QR in your battery bank. This inverter/charger also includes a transfer switch so it will automatically turn off the inverter when it sees shore power coming in. Be sure to...
view full answer... - Go Power Industrial Pure Sine Wave Inverter Charger and MT50 ControllerThe Go Power Industrial Pure Sine Wave Inverter Charger, # 34280055, that you reference, can be in the same system with with your MT50 controller but you will not have full functionality. This 2,000-Watt inverter charger combines a pure sine wave inverter, converter charger, and automatic transfer switch. It saves space and simplifies installation by consolidating 3 vital components into 1 compact unit that includes fixed-mount remote. You can keep the MT50 in place but depending on how...
view full answer... - Power Consumption Of The Go Power IC2000 Pure Sine Wave Inverter Charger Hi Louis, The power draw of the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 is going to vary greatly depending on the load placed on it. The maximum power consumption at a full load is going to be roughly 160 - 180 amps. With no load the power consumption will sit around 25 watts and when in standby mode will drop to less than 5 watts. You'll likely never be at full load for the unit so it likely won't ever rise high enough to hit 160 - 180 amps. You can try testing...
view full answer... - RV Inverter that Has Enough Wattage for 1,500 Watt HeaterSince your space heater is rated for 1500 watt you would need a higher rated panel than the part # PD4060K which is only rated at 810 watts. The heater would over draw it. We do have the GO Power inverter part # 34280055 which is rated at 2,000 watts and would work fine.
view full answer... - Parts Needed To Convert Promaster Van To RV With Shore Power, Not Using Any Solar PowerYou will need a plug on the outside of your 2021 Ram ProMaster 2500 and the wiring for this plug. In addition, you will need a converter to convert the power from 110V to 12V. I recommend the Furrion Replacement RV Power Inlet - 30 Amp Twist Lock - Stainless Steel, part # F30ITSSS. The twist lock keeps this cord weatherproof. You will also need a transfer switch and a converter. You can get both with the Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12V,...
view full answer... - Go Power Inverter Compatible with a Solar Set UpWe do have solar kits from Go Power like the Go Power Solar Elite Charging System # 34282184 which would include the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055, so you would not need to pick up one separately. Or you do have the option of getting the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 individually and adding the other solar components down the road.
view full answer... - Replacement Converter/Charger For Charging Lithium Batteries With a Parallax 7355 ConverterYou will be able to use the Progressive Dynamics Inteli-Power RV Converter and Battery Charger # PD9160ALV to charge lithium ion batteries. You will have to remove the Converter # PD4655V on your Parallax 7355 and wire the lithium converter in its place. This will charge your batteries as well as run your 12 volt systems on your RV when connected to 120 volt power. If you wish to be able to run your 12 volt and 120 volt systems off your battery when not connected to 120 volt power you...
view full answer... - Higher Rated Inverter Charger for Lithium Battery BankThe highest rated charger we have would be the Go Power Pure Sine Wave Inverter Charger part # 34280055 which is rated for up to 100 amps and is lithium battery compatible. Running this to all 4 of your batteries would put a 25 amp charge on all of them if you charged them in parallel. Or if you had the power available you could run multiples of this charger to your bank.
view full answer... - Will Inverter Power AC Appliances if Powered by BatteriesYes, if you connected the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 to your battery it would put out AC power like you would need to run your recliner and TV. This was designed to take DC power like your battery and convert it to AC power.
view full answer... - Battery and Inverter for Camper VanI am not aware of any camper inverter that will produce 240 volts AC power. I think you meant 120 volts AC, like you have in your house. If you have a 2000 watt (120 Volt) AC pure sine wave inverter, like the Go Power # 34280055 inverter, then you can produce 2000 watts all day long as long as you have enough batteries. You first need to conduct an energy audit to determine your needs. Please read the three attached documents to help you pick a perfect fit You mentioned 110 amp hour...
view full answer... - Recommended Power Inverter, Battery Charger and Transfer Switch For a Tiny Home BuildFor your tiny house build I recommend the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055. This one device will take the place of 3 separate units. First it is a inverter capable of 2,000 constant watts of power and has a starting watt capacity of 4,000. Second it is a transfer switch that will run your 120 volt power from your generator or from your batteries when the generator is switched off. Lastly it has a charger capable of 100amps charging for your battery bank. The...
view full answer... - Recommended Inverter Charger for a 1967 Ideal Camper Trailer Normally you'd would want to use a power distribution panel/converter to take the shore power and convert to DC to power 12V loads and charge batteries. Then solar would be hooked directly to the batteries and an inverter would hook up to the batteries to power AC loads when not using shore power from the distribution panel. I recommend using the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055. This is an all in one power center, charger (AC to DC), inverter (DC to AC),...
view full answer... - How To Wire In a Power Distribution Box To Accept Power From Shore Power and a 12V Inverter? You are correct that the Progressive Dynamics RV Power Control Center # PD4135K is only a power distribution box and charger for your batteries. If you are going to run power to the Progressive Dynamics distribution box off of a shore power cord and an inverter you will need to also use a Automatic Transfer Switch # F30ATS. The transfer switch will allow from power to come from 2 different sources. When you disconnect your shore power or if the power were to go out it will automatically...
view full answer... - Options for Go Power InverterThe Go Power Industrial Pure Sine Wave Inverter Charger is a 2,000 Watt, 100 Amps unit at 12V, # 34280055. It is a 3-in-1 unit as it combines the functions of a pure sine wave inverter, converter charger, and automatic transfer switch all in the same unit. Please see the attached product review video. If this inverter is larger than you need/want there are multiple other options available. With or without a transfer switch or charger built in. I strongly suggest that only a pure sine...
view full answer... - Is Go Power IC 2000 Inverter Compatible with LifePo4 Lithium BatteriesYes, the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 that you referenced is compatible with lithium LifePo4 batteries like the part # 34282740 that you also referenced.
view full answer... - Tow Mirror Solution for 2022 Ford F-150 Raptor that Fits WellSince we do not have 2021 Ford Raptor tow mirrors that are custom fit it would seem likely that we won't be getting them for the 2022 either but the great news is we know that the K-Source tow mirrors part # KS3990 fit well as we have had the chance to install them on a similar 2018 Raptor. I attached an install video for this for more info as well.
view full answer...
- Which Transfer Switch for Jayco Melbourne with 30A Shore Power I recommend using the Progressive Dynamics Transfer Switch with Quick Flip Connectors - Plastic Case - 30 Amp - 120V # PD5110010Q because of the reliability of Progressive Dynamics components. You could also buy an inverter that comes with a transfer switch like the Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12V # 34280055. This GoPower Inverter Charger offers pure sine wave power to help protect sensitive electronics and acts as an inverter, converter...
view full answer... - Amperage Draw of Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 Turned OnI am not sure how you are measuring the amps draw of the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 but it sounds like you might actually be seeing the milliamp draw instead of the amp draw. Which 74 milliamps is .074 amps and 133 milliamps is .133 amps which would be about right for just turning the unit on.
view full answer... - Compatible Battery Types For The Go Power 2000 Watt Pure Sine Wave Inverter Charger The Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 you referenced is compatible with sealed/gel, AGM, flooded/wet cell, and lithium batteries so you'll have no issues using it with your Battle Born lithium batteries. The included fixed-mount remote will allow you to select the correct charging profile for your battery type.
view full answer... - Which Inverter Charger Should I Use For My Keystone Montana RV?The yellow wire is the wire that connects to the solar panels. I have attached a detailed wiring diagram and demonstration video for the Redarc In-Vehicle BCDC Battery Charger - Dual Input - DC to DC - 12V/24V - 50 Amp # 331-BCDC1250D. In regard to an inverter/charger with a built-in transfer switch, I recommend going with Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12V # 34280055 and Installation Kit # 342GPDCKIT4. If you need more than 2,000 watts,...
view full answer...
- Parts Needed To Power Inside an Enclosed Trailer For Lighting and To Add A CompressorFirst you will need to decide if you wish to keep everything 12 volt powered or if you also wish to run 120 volt power in your enclosed trailer. For 12 volt you will need to install Lights # ILL72CB which can be powered by a Light Switch # 37213575. We also have the Viair Heavy Duty Onboard Air Compressor with 2.5 Gallon Tank # VA56WR which will allow you to air up your tires when needed. Depending on the amount of use when disconnected will determine the amount of Batteries # BRW34FR...
view full answer... - Does Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 Come with RemoteThe Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 that you referenced does not require an additional remote. It comes with one so there would be no need to purchase an additional one. The remote essentially is an external panel that you'd mount and a wire connects between it and the main unit.
view full answer... - Maximum Voltage Drawdown With Go Power Lithium Batteries And InvertersThe Go Power Lithium RV Battery - Deep Cycle - LiFePO4 - Group 4D - 12V - 250 Amp Hour Item # 34282740 has a shut off at 8v. The Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12 Item # 34280055 has a shut off at 10.5v. I spoke with the Go Power technician and he stated that the Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12V Item # 34280055 and the Go Power Industrial Pure Sine Wave Inverter Charger - 3,000 Watts - 100...
view full answer... - Recommended Charge Converter and Transfer Switch for Solar Panels and Shore PowerThe Go Power Industrial Pure Sine Wave Inverter Charger part # 34280055 is my recommendation for an all-in-one unit that can take input from AC and convert this to DC for charging batteries as well as switching from solar to shore power when needed. The transfer switch is automatic as well so there will be no need to manually flip switches. It can also be used as an inverter for powering AC accessories with DC batteries.
view full answer...
Do you have a question about this RV Inverter?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Edited by:
Amanda M
Written by:
Halie H
Updated by:
Alex H
Updated by:
Manda E
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/28/2023
I reached out to the manufacturer about the experience that you are having with the inverter. They advised that when the RV is connected to shore power the charge function should be on. It will always start to charge when shore power is applied. It can be stopped from charging by pressing the charger on[off button. You had mentioned that you had changed the power save mode to 15 minutes from the default. Did you change the search watts to 15 amps? Can you give more details as to what setting you changed?